UV-C Quartz for Disinfection and Water Treatment: How to Select Custom Fused Quartz Components

Why UV-C Quartz Matters

Ultraviolet disinfection is one of the fastest-growing water and air treatment technologies in Europe and North America, and every UV-C system depends on one precision component: the fused quartz sleeve that separates the lamp from the medium. Standard glass blocks UV-C light below 300 nm; only high-purity fused quartz transmits it efficiently. Choosing the right UV-C quartz grade, wall thickness and finish determines dose delivery, lamp life and system reliability. This guide explains how fused quartz UV transmission works, what components are needed, and how to specify custom quartz parts for disinfection equipment.

How UV-C Transmission Works in Quartz

UV-C light at 254 nm is the germicidal wavelength produced by low-pressure mercury lamps. High-purity fused quartz transmits roughly 90–93% of 254 nm energy through a 1 mm wall, while ordinary glass transmits almost none. Transmission depends on three factors: iron and metallic impurity content, OH (hydroxyl) content, and surface finish. Synthetic grades such as JGS1 have extremely low metallic impurities and deliver the highest deep-UV transmission; flame-fused natural quartz grades such as JGS2 remain economical while still passing 254 nm well. JGS3 is the infrared grade and is not recommended for UV-C.

Key UV-C Quartz Components

Component Function Typical Specification
Lamp sleeve / protective tube Separates lamp from water or air JGS2, OD 25–50 mm, 1.5–2.0 mm wall
Viewport / inspection window Confirms lamp operation JGS1, 30–150 mm, 2–5 mm thick
Flow-cell / cuvette Inline UV dose monitoring JGS1, optical finish both sides
Custom fused assemblies Flanges and windows for reactors Ground and polished sealing faces

Many standard needs are covered by custom quartz tubes and rods and custom industrial sight glasses, which can be cut, ground and polished to reactor dimensions.

Grades for UV Applications

Grade Process 254 nm Transmission (1 mm) Best Use
JGS1 Synthetic (Sio2 ≥ 99.99%) > 90% UV monitoring cells, high-dose systems
JGS2 Flame fused natural > 85% Lamp sleeves, standard reactors
JGS3 Infrared grade Poor Not for UV-C
Standard quartz tube Electric fused > 80% Low-cost sleeves with shorter life

For laboratory and analytical use, custom quartz cuvettes provide the optical path length and transmission needed for UV dose verification.

Manufacturing and Customization

Custom UV-C quartz components are made from raw tube, rod or plate stock and machined to drawing. Key operations include OD/ID grinding to tight tolerances, end sealing or fusing, flange welding, and polishing of optical surfaces. Sleeves for standard low-pressure lamps are usually 25–50 mm OD with 1.5–2.0 mm walls; larger medium-pressure systems need thicker walls and careful thermal design. Specify the transmission requirement at 254 nm, dimensional tolerances, pressure rating and sealing method before production.

Selection Checklist

  1. Confirm the operating wavelength (254 nm typical; 185 nm for advanced oxidation)
  2. Choose grade by transmission and budget (JGS1 for critical optics, JGS2 for sleeves)
  3. Define OD, wall thickness, length and end configuration
  4. Specify surface finish on sealing and optical faces
  5. Check pressure and thermal cycling conditions
  6. Request a 254 nm transmission test report with each batch

Applications

  • Municipal and industrial water disinfection
  • Wastewater and ballast-water UV treatment
  • HVAC and air-purification UV systems
  • Surface and packaging disinfection lines
  • UV dose-monitoring instruments and photometers
  • Aquaculture and food-processing water loops

UV reactor dose validation follows photometric and bioassay methods developed by laboratories such as NIST and research groups at ETH Zurich.

FAQ

Q: Why can't standard glass be used for UV-C lamp sleeves?
A: Ordinary glass absorbs nearly all UV-C below 300 nm, so the germicidal dose never reaches the water or air.

Q: Which quartz grade is best for lamp sleeves?
A: JGS2 flame-fused quartz is the standard choice, balancing transmission above 85% at 254 nm with economical cost.

Q: Does quartz sleeve thickness affect UV dose?
A: Yes; transmission falls slightly with wall thickness. Use the thinnest wall that meets pressure and mechanical requirements.

Q: Can quartz sleeves be cut to custom length?
A: Yes. Sleeves, viewports and windows are cut, ground, polished and end-sealed to reactor drawings.

Q: Do you supply transmission test reports?
A: We can provide 254 nm transmission measurements with production batches on request.

Conclusion

UV-C disinfection performance starts with the quartz. Select a grade that transmits 254 nm efficiently, specify the correct wall thickness and finish, and verify transmission batch by batch. With the right custom fused quartz components, UV systems deliver consistent dose, longer lamp life and lower operating cost.

Send your reactor drawing or sleeve dimensions for a quotation.

ブログに戻る

コメントを残す